How to Edit Your Videos into an Entertaining Video
Editing Point of View Footage Into an Entertaining Video
Point of View footage alone isn’t meant to create full videos, but since most of us don’t have paparazzi following us around there’s only so much we can do. Here is the general procedure I follow when creating a POV video along with some tips on how to keep viewers entertained.
You have now shot your footage using tips from my previous blog ‘GoPro HD HERO Mounting and Filming Tips’. It’s time to edit!
Importing Footage:
Once the footage is on my computer I convert it to a format more compatible with Final Cut Pro. Depending on your system and editing software, you may or may not have to do this, or you may have to find different settings that work best with your system.
To convert my footage, I open the clip in Mpeg Streamclip’s free software [http://www.squared5.com/] and convert it to Apple ProRes 422 video at Full Quality. Because clips shot on POV cameras are so long and a lot of the footage is scrap, I always go through the long clips in this program and mark “IN” and “OUT” points in the video and only convert the small portions that I will use.
Steps:
1. Find the first frame of footage you would ever use (but make sure you have extra footage because you can always cut out excess video later). Press “I” to mark an “IN” point.
2. Find the last frame of footage you would ever use. Press “O” to mark an “OUT” point. Your timeline will now look like this.

3. Choose File a Export to Quicktime. In the Compression settings, choose Apple ProRes 422. Drag the Quality to 100%. Choose your proper Frame Rate, 30 or 60fps in most cases. Hit “Make Movie.”
4. Repeat steps 1-3 for each clip you want to use. Apple ProRes 422 is a very high quality video, therefore large file sizes. If you convert the entire .mp4 clip to this format it will take a long time and result in a massive file size.
Beginning the Edit:
Before I ever place clips in the timeline, I choose a song for the video. Lay that song down in your timeline, now you’re set to begin the edit. Here are some tips I always keep in mind when editing.
Finalizing the Edit:
I find the best thing to do before finalizing the edit is to turn off my computer for the night. When I wake up I will open up the video and watch it again with a fresh eye. If anything sticks out, change it, but if not you’re ready to export the video and put it online.
Export and Upload:
Make sure you export your video using Youtube and Vimeo’s recommended compression settings.

More info can be found here: http://vimeo.com/help/compression
Here is one of my videos where I followed the above guidelines and created a couple sequences by running the same paths over and over again while shooting from different angles.
Keswick Backcountry Snowkiting in Slow-Mo from Big Fall Productions
Brendan Schnurr
~Big Fall Productions
Comments
19 03 2010 at 10:32 AM
Excellent job Brendan, useful, simple directions. When are you starting your own blog?
20 03 2010 at 05:53 AM
Who are you kidding?
You always have the paparazzi following you around!
![]()
awesome writeup!
-=c
24 03 2010 at 06:25 PM
I tried to figure out iMovie in highschool and it didn’t make sense to me. Final Cut Pro just worked how my mind thought an editing program should. Lay down the music then start importing the viz, you got it Mike.
Thanks for the positive feedback guys, excited to see your videos!
26 03 2010 at 02:18 PM
Great job Brendan!!
24 12 2010 at 11:24 PM
Hey Brendan,
Thanks for the write-up! Both the editing and filming articles were extremely helpful. I am in high school and I just got a GoPro for christmas. I have been dying to start filming and editing my friends and I skiing, surfing, and skating. I have iMovie right now and I am wondering if I should switch to Final Cut. If so which one should I use? Final Cut Pro, Studio, 7??? Also, the importing process seems like it will become a problem soon. Do you have any tips on keeping the files from becoming out of control and overloading my hard drive?
Thanks,
Max Allen
26 12 2010 at 06:09 AM
Hey Max,
Merry Christmas! You can get by with iMovie but Final Cut Studio is ideal for advanced features. Final Cut Express doesn’t work with GoPro footage well and doesn’t give you the 422 compression you need to work with. I recommend waiting a bit though as a new Final Cut Studio will be released early this year and should work a lot nicer with GoPro footage. It may even cut out the conversion process.
As for keeping room on your hard drive, work on one project at a time. When you have perfected your project and exported it as a 422 file to keep on your computer and a h264 for the web you can delete the files…but even that’s hard to do for an editor. I have ended up with 4 external hard drives so I rarely have to delete footage unless I know I will never use it again.
Let me know if you have any other questions.
Brendan








18 03 2010 at 11:13 AM
Thanks for the nice write up Brendan. Since I’m an amateur editor I have been using iMovie, You inspired me to try Final Cut PRO.
I’m also going to try “editing to the beat”. I have been doing it backwards - silly me!